Buying office furniture
Panel office furniture has become a new category in the office furniture category with novel styles, bright colors, clear wood grains, and no deformation, cracking, moth-proofing, and moderate price. Pay attention to the following 4 points when purchasing board office furniture. As a consumer, you must know about it before you buy it, so you do n’t have to take a detour.
1. Look at the production: After cutting the panel of the board-type office furniture, the profile should be flat, the angle is good, and there is no phenomenon of plate tilt. The side and surface decoration mainly depends on whether the decorative parts are evenly glued, whether the bonding is firm, and the trimming is smooth and smooth. No trace of adhesion can be found on the edges of the fine board.
2. Look at the face: The board-type office furniture is based on artificial boards such as particleboard and medium-density fiberboard, and the surface is decorated with melamine, PVC, thin wood and wood-grain stickers. When buying, it is mainly to see whether the surface plate has defects such as scratches, indentations, blisters, peeling and peeling, and obvious glue marks, and whether it has a clean, smooth and full effect.
3. Look at the amount of formaldehyde release: panel-type office furniture uses artificial wood as the main substrate, which is made of wood scraps and scraps. Urea-formaldehyde resin glue is inevitably used during production, and this glue will Free formaldehyde is released, which can easily cause product formaldehyde to exceed standards. The formaldehyde limit of domestic plate is E1 (E1≤1.5mg / L), and the limit of formaldehyde of imported plates (taking German Eggboard as an example) can reach E0 (E0≤0.5mg / L) or super E0.
4, look at the hardware: metal parts should be smart, smooth, surface plating treatment, there should be no rust, burrs and so on. The open connection requires smooth opening and closing process, soft resistance, not too tight or too loose, and no obvious squeak. The installation of various accessories should be tight, flat, straight, firm, and there should be no chipping or loosening at the joints. The chamfers, rounded corners and round lines should also be uniform.
Home improvement is a labor-intensive task. Although it is hard to work from the decoration to the purchase of office furniture, it is worthwhile to create a beautiful and beautiful home environment. The above are the board-type office furniture buying tips provided by the decoration together, I hope to help you.